Luces traseras Para Lincoln MKX

Tail Lights for Lincoln MKX

Clear a space around your crossover and rule the streets with tail lights equipped in your Lincoln MKX. Choosing the right tail lights is both a courtesy to other drivers and can also display your unique aesthetic as you drive along the road. Consider the types and styles of tail lights for Lincoln MKX and select the brake indicators that perfectly compliment the smooth curves and raw power of your SUV.

What types of tail lights are available?

While high-intensity discharge (HID) bulbs are considered the gold standard when it comes to Lincoln tail light illuminators, light emitting diodes (LEDs) have also gained a notable foothold in the automotive lighting market. HID bulbs are comprised of a glass housing that encases two tungsten electrodes. When gas is released into the bulb, a bright electrical current is formed between the electrodes. HID bulbs are rated to last for about 2,000 hours. LEDs are small, demonstrate minimal energy uptake, and won’t overheat, even after hours of use on your MKX. Applied effectively, LEDs can be brighter than any other lighting technology, and each diode is rated to last an amazing 50,000 hours.

How do you install a new tail light assembly?

When replacing a cracked lens or upgrading to LEDs, Lincoln MKX owners often find themselves facing the task of installing one or both of the tail light assemblies in their luxury crossover. Replacing the tail light assemblies in your Lincoln is a simple task requiring basic shop tools and about 15 minutes of labor for each side.

  • Turn off the engine and open the tailgate. If replacing both assemblies, pick a side of the vehicle to start with.
  • Remove the two bolts clearly visible at the edge of the tail light assembly. Use a flat-bladed tool to wiggle the assembly out of the cavity.
  • Disconnect the electrical harness and discard the old assembly. Position the new assembly into place.
  • Connect the electrical harness to the new assembly. Push it into the cavity.
  • Secure the new assembly with the two bolts to complete the installation. Repeat these steps for the other tail light if necessary.
How do you replace the third brake light?

Required by law in North America, the third brake light is an essential component of on-the-road safety. Also called the center high mount stop light, this brake indicator can be clearly seen by the drivers of tall vehicles like semi trucks even if your MKX lights are obscured. Replacing this critical part of your Lincoln is easy and takes about 30 minutes.

  • Turn off the engine and locate the third brake light above the rear window.
  • Remove the two screws holding the brake light in place.
  • Pull the center high mount stop light a short distance away from your Lincoln and disconnect the electrical harness.
  • Position the new brake light assembly into place and connect the electrical harness.
  • Push the assembly into the cavity and insert the screws to complete the installation and get ready to drive.

Categorías